Troubleshoot Gooloo jump starter: Gooloo is one of the most popular and reliable brands of jump starters. ਹਾਲਾਂਕਿ, there are times when it can be difficult to figure out why a ਗੋਲੂ ਜੰਪ ਸਟਾਰਟਰ isn’t working. This article will help you troubleshoot some common problems with Gooloo jump starters.
Why is Gooloo jump starter not working?
If you’re having trouble with your Gooloo jump starter not charging or beeping, there are a few things you can check to see if the problem is isolated and fixable, or if it’s a more systemic issue that requires a replacement. If the battery isn’t fully charged, the battery will not provide enough power to start the battery-powered device. Try charging the jump starter for at least 8 hours before using it again.
Try disconnecting everything from the jump starter and try starting it again – this should clear up most cases of this issue. Is there debris or dirt blocking any of the cables? This can cause problems with how electricity flows through the jumper and can prevent it from powering on. Gently remove any debris or dust that may be blocking any connectors or ports on the device and give it a try again.
If your Gooloo jump starter is beeping, ਚਾਰਜ ਨਹੀਂ ਹੋ ਰਿਹਾ, or otherwise not operating correctly, ਇੱਥੇ ਕੁਝ ਚੀਜ਼ਾਂ ਹਨ ਜੋ ਤੁਸੀਂ ਕੋਸ਼ਿਸ਼ ਕਰਨ ਅਤੇ ਸਮੱਸਿਆ ਨੂੰ ਹੱਲ ਕਰਨ ਲਈ ਕਰ ਸਕਦੇ ਹੋ. The first step is to make sure that the battery is fully charged and inserted properly into the jump starter. If the battery is low or defective, the jump starter may still work, but it will not be as powerful or efficient as it could be.
Make sure that all cables are plugged in properly and that there are no obstructions between the battery and the power outlet. If everything looks good and the problem persists, then you may need to replace the battery or motherboard in your Gooloo jump starter.
What to do if a Gooloo jump starter beeping?
If you’re having trouble with your Gooloo jump starter beeping, not charging or any other issues, here are some tips to help you get it working again.n Make sure the battery is fully charged. Gooloo jump starters come with an AC adapter and a battery, so make sure you’re using both of them. If the battery is low on power, the jumper will not work. Make sure the cord is plugged into an outlet and into the Gooloo jump starter. The cord should be long enough to reach from where the jump starter is to where you want it to charge.
If it’s not plugged in properly, the jumper will not work. Make sure the switch on the jump starter is turned on. The switch should be green when it’s turned on and should light up when you press it. If it doesn’t light up or if it’s not turning off when you press it, the switch may be broken and needs to be replaced. ਕਿਸੇ ਵੀ ਮਲਬੇ ਜਾਂ ਵਿਦੇਸ਼ੀ ਵਸਤੂਆਂ ਦੀ ਜਾਂਚ ਕਰੋ ਜੋ ਜੰਪ ਸਟਾਰਟਰ ਦੇ ਅੰਦਰ ਬੈਟਰੀ ਸੰਪਰਕਾਂ ਨੂੰ ਰੋਕ ਰਹੀਆਂ ਹਨ. ਇਸ ਕਾਰਨ ਜੰਪਰ ਠੀਕ ਤਰ੍ਹਾਂ ਕੰਮ ਨਹੀਂ ਕਰ ਸਕਦਾ.
ਜੇਕਰ ਤੁਹਾਨੂੰ ਆਪਣਾ Gooloo ਜੰਪ ਸਟਾਰਟਰ ਸ਼ੁਰੂ ਕਰਨ ਜਾਂ ਚਾਰਜ ਕਰਨ ਵਿੱਚ ਮੁਸ਼ਕਲ ਆ ਰਹੀ ਹੈ, ਇੱਥੇ ਕੁਝ ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ ਸੁਝਾਅ ਹਨ: ਬੈਟਰੀ ਵੋਲਟੇਜ ਦੀ ਜਾਂਚ ਕਰੋ: ਜੇਕਰ ਬੈਟਰੀ ਵੋਲਟੇਜ ਘੱਟ ਹੈ, ਇਹ ਇੱਕ ਮਰੀ ਹੋਈ ਬੈਟਰੀ ਦੇ ਕਾਰਨ ਹੋ ਸਕਦਾ ਹੈ. ਬੈਟਰੀ ਨੂੰ ਮੁੜ-ਚਾਰਜ ਕਰਨ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰੋ ਅਤੇ ਦੇਖੋ ਕਿ ਕੀ ਇਹ ਮਦਦ ਕਰਦਾ ਹੈ. ਜੇ ਨਾ, ਇਹ ਯਕੀਨੀ ਬਣਾਉਣ ਲਈ ਜਾਂਚ ਕਰੋ ਕਿ ਕੇਬਲ ਸਹੀ ਢੰਗ ਨਾਲ ਜੁੜੀਆਂ ਹੋਈਆਂ ਹਨ ਅਤੇ ਜੰਪ ਸਟਾਰਟਰ ਵਿੱਚ ਪਾਵਰ ਜਾ ਰਹੀ ਹੈ. ਗਲਤੀਆਂ ਦੀ ਜਾਂਚ ਕਰੋ: ਜੇਕਰ ਤੁਸੀਂ ਇੱਕ ਐਪ ਦੇ ਨਾਲ Gooolo ਜੰਪ ਸਟਾਰਟਰ ਦੀ ਵਰਤੋਂ ਕਰ ਰਹੇ ਹੋ, ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਐਪ ਅੱਪ ਟੂ ਡੇਟ ਹੈ ਅਤੇ ਇਸ ਵਿੱਚ ਕੋਈ ਤਰੁੱਟੀਆਂ ਨਹੀਂ ਹਨ.
ਜੇ ਤੁਸੀਂ ਇੱਕ ਭੌਤਿਕ ਗੂਲੂ ਜੰਪ ਸਟਾਰਟਰ ਦੀ ਵਰਤੋਂ ਕਰ ਰਹੇ ਹੋ, ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਸਾਰੀਆਂ ਕੇਬਲਾਂ ਸਹੀ ਢੰਗ ਨਾਲ ਪਲੱਗ ਕੀਤੀਆਂ ਗਈਆਂ ਹਨ ਅਤੇ ਜੰਪ ਸਟਾਰਟਰ 'ਤੇ ਸਵਿੱਚ ਚਾਲੂ ਹੈ. Clean the battery contacts: ਜੇਕਰ ਤੁਸੀਂ ਇੱਕ ਐਪ ਦੇ ਨਾਲ Gooolo ਜੰਪ ਸਟਾਰਟਰ ਦੀ ਵਰਤੋਂ ਕਰ ਰਹੇ ਹੋ, try disconnecting and reconnecting the battery several times. If that doesn’t help, try cleaning the contacts on the battery with a dry cloth.
Cause and solution of Gooloo gp37 jump starter not charging
If you are experiencing problems with your Gooloo jump starter not charging or beeping, there is a likely solution. Follow these steps to solve the problem: Check the battery level. The first thing you should do if your Gooloo jump starter is not charging is to check the battery level.
Make sure that the battery is at least half full before trying to charge it. ਜੇਕਰ ਬੈਟਰੀ ਘੱਟ ਹੈ, it may not be able to accept a charge from the jump starter. Check for loose cables and connectors. If your Gooloo jump starter is not charging or beeping, make sure that all cables and connectors are secure. Loose cables can cause problems with the flow of electricity, while collectors can become disconnected. Check them both visually and by trying to correct them manually. Check for bad batteries. If all of the above tests fail, it may be necessary to replace the batteries in your Gooloo jump starter.
If your Gooloo jump starter is not charging or beeping, there is probably a problem with the battery. Follow these steps to troubleshoot the issue and fix it. Check the battery’s voltage. ਗਾਲਬਨ, the battery is not charging because the voltage is low. Check the voltage using a voltmeter. ਜੇ ਇਹ ਹੇਠਾਂ ਹੈ 12 ਵੋਲਟ, the battery needs to be replaced.
Make sure all cables are connected properly. Make sure that all of the cables are plugged into the jump starter and into a power outlet. ਵੀ, make sure that the cable connecting the battery to the jump starter is connected tightly. Clean the jump starter’s contacts. Cleaning the contacts on the battery and on the jump starter will help to improve charging and minimize problems with electrical interference.
Reset the Gooloo jumpstarter. ਕਈ ਵਾਰ, restarting the Gooloo jumpstarter can fix problems with it not charging or beeping.
If you are having issues with your Gooloo jump starter not charging or beeping, there may be a Boost Button issue. The Boost Button is located on the side of the jump starter and when it is pressed, it sends a surge of power to the battery to help it start. If you are experiencing this issue, try pressing and holding the button for a few seconds until the jump starter starts up properly.
ਜੇ ਇਹ ਕੰਮ ਨਹੀਂ ਕਰਦਾ, you may need to replace the Boost Button.
nGooloo jump starter boost button is a button on the front of the Gooloo jump starter that you push to get more power from the battery. If your Gooloo jump starter is not charging or beeping, there may be something wrong with the battery or the charger. ਇਸ ਬਲਾਗ ਪੋਸਟ ਵਿੱਚ, we will discuss some common issues with Gooloo jump starters and how to troubleshoot them.
how to turn off Gooloo jump starter?
If your Gooloo jump starter beeps and doesn’t seem to be charging, here are a few troubleshooting steps you can take: Remove the battery pack. If the battery pack is not removable, try wiggling it side to side. If it seems loose or if the wires are visible, it may need to be replaced. If the battery pack is removable, remove the battery.
Check the charging cable. Make sure that it is plugged into an electrical outlet and into the jump starter. Check the battery connection. Make sure that the positive (+) ਅਤੇ ਨਕਾਰਾਤਮਕ (-) terminals on the battery are connected firmly. If they aren’t, gently loosen them with a screwdriver and re-connect them properly.
Clean or replace any components that may be malfunctioning. Some things that may need to be cleaned or replaced include the charging cable, the battery pack, or the jump starter itself.
If your Gooloo jump starter is beeping and not charging, ਸਮੱਸਿਆ ਦਾ ਨਿਪਟਾਰਾ ਕਰਨ ਲਈ ਤੁਸੀਂ ਕੁਝ ਚੀਜ਼ਾਂ ਕਰ ਸਕਦੇ ਹੋ. ਪਹਿਲਾਂ, check to see if the battery is fully charged by checking the green light on the jump starter. ਜੇਕਰ ਬੈਟਰੀ ਪੂਰੀ ਤਰ੍ਹਾਂ ਚਾਰਜ ਹੋ ਗਈ ਹੈ, then the problem may be with the charger. Try plugging another charger into the wall to see if it charges the battery. If the battery still does not charge, ਫਿਰ ਸਮੱਸਿਆ ਜੰਪ ਸਟਾਰਟਰ ਨਾਲ ਹੋ ਸਕਦੀ ਹੈ. Try replacing the battery or resetting it by pressing and holding down both of the jump starter’s buttons for five seconds.
ਤੁਸੀਂ ਇੱਕ ਗੂਲੂ ਜੰਪ ਸਟਾਰਟਰ ਨੂੰ ਕਿਵੇਂ ਰੀਸੈਟ ਕਰਦੇ ਹੋ?
If you’re having trouble with your Gooloo jump starter beeping and not charging, ਸਮੱਸਿਆ ਦਾ ਨਿਪਟਾਰਾ ਕਰਨ ਲਈ ਤੁਸੀਂ ਕੁਝ ਚੀਜ਼ਾਂ ਕਰ ਸਕਦੇ ਹੋ. ਪਹਿਲਾਂ, make sure that the battery is properly installed in the jump starter. You can check this by pressing down on one of the battery terminals and seeing if it makes contact with the metal casing of the jump starter. If it’s not connected properly, you’ll need to replace the battery. ਦੂਜਾ, make sure that the power cord is properly plugged into an outlet and into the jump starter itself.
If it’s not plugged in fully, it will cause the jump starter to beep and not charge. You can also try unplugging and plugging in the power cord several times until it works. ਅੰਤ ਵਿੱਚ, ਜੇ ਹੋਰ ਸਭ ਅਸਫਲ ਹੋ ਜਾਂਦਾ ਹੈ, you can try resetting your jump starter by pressing and holding down both buttons simultaneously for 10 ਸਕਿੰਟ. This should reset all of the jump starter’s settings and hopefully fix your issue.
If your Gooloo jump starter is beeping and not charging, there are a few things you can do to troubleshoot the issue.n First, check to see if the battery is fully charged by pressing the power button and checking the light indicator. If the light is green then the battery is fully charged.
If it’s orange or red, then charge the battery for at least four hours using a standard household outlet.n If the battery still isn’t working, you can try resetting the jump starter by unplugging it from the wall and removing the battery. ਅਗਲਾ, hold down both of the reset buttons for five seconds each. ਅੰਤ ਵਿੱਚ, plug in your jump starter and reattach the battery.
Troubleshoot Gooloo jump starter Conclusion
If your Gooloo jump starter is beeping and not charging, ਸਮੱਸਿਆ ਦਾ ਨਿਪਟਾਰਾ ਕਰਨ ਲਈ ਤੁਸੀਂ ਕੁਝ ਚੀਜ਼ਾਂ ਕਰ ਸਕਦੇ ਹੋ. ਪਹਿਲਾਂ, ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਬੈਟਰੀ ਪੂਰੀ ਤਰ੍ਹਾਂ ਚਾਰਜ ਹੋਈ ਹੈ. If the battery still does not seem to be working properly, try connecting it to another power outlet in order to see if that resolves the issue.