Hulkman 점프 스타터 오류 코드 및 솔루션의 의미

Hulkman jump starter error codes and solutions can be frustrating, but with a little knowledge, you can get your jump starter up and running again in no time. 이 기사에서, we’ll go over the most common Hulkman jump starter error codes and what to do if you encounter one.

How to troubleshoot Hulkman jump starter error codes?

Hulkman jump starter error codes can be quite frustrating to troubleshoot. 하지만, with a little detective work, you can quickly identify and solve the issue. Here are some tips for troubleshooting Hulkman jump starter error codes:

1. 배터리 잔량 확인. Make sure the battery is fully charged and that the jumper cables are connected properly.
2. Check the output voltage. If the output voltage is low, check to see if the battery is fully charged. If the voltage is still low, there may be a problem with the jump starter.
3. Check the output current. If the output current is low, check to see if the battery is fully charged. If the current is still low, there may be a problem with the jump starter.
4. Check the jump starter’s fuse. 퓨즈가 끊어진 경우, the jump starter may not be able to start.
5. Check the jump starter’s circuit breaker. If the circuit breaker is tripped, the jump starter may not be able to start.
6. Check the jump starter’s ground. If the ground is not good, the jump starter may not be able to start.

Hulkman jump starter error code 1

HULKMAN products feature multiple advanced safety technologies, including reverse-polarity protection. It can detect a reverse attachment to your car battery automatically. If you reverse the polarity of the clamps, it will display the “Error Code 1/Error Code ” message as the above picture revealed.

If the screen shows “Error Code 1,” please follow these 3 steps:

1. 단계 1: Take off and exchange the clamps. Recheck your car battery terminals: the red clamps connect to “+” and the black clamps to “-“;
2. 단계 2: The screen will display the “READY” icon, following which you can go back to start your engine ignition.
3. 단계 3: 자동차 배터리에서 클램프를 제거하십시오..

Hulkman jump starter error code 2

1. 단계 1: 배터리 클램프를 점프 스타터에 삽입하고 클램프를 자동차 배터리에 부착합니다. (The screen may display “Error Code 2” or nothing).
2. 단계 2: 전원 버튼과 손전등 버튼을 동시에 2~3초 동안 눌러 강제 출력을 시작합니다..
3. 단계 3: 자동차 엔진 시동.
4. 단계 4: 자동차 배터리에서 클램프를 제거하십시오..

Hulkman jump starter error code 3

Hulkman jump starter error code 4

If the screen shows ‘Error Code 4’, it means the jump starter has entered the Safe Mode automatically.

Please follow these 3 steps:

What to do if Hulkman jump starter error codes occur?

If you’re getting error codes on your Hulkman jump starter, it means there’s a problem with the unit. The above is what you can do to troubleshoot and fix the issue. If you’re still getting error codes after trying these tips, contact Hulkman customer service([email protected]) for further assistance.

What to do if Hulkman jump starter doesn’t work?

만약 당신의 헐크맨 점프 스타터 doesn’t seem to be working, 문제를 해결하기 위해 수행할 수 있는 몇 가지 작업이 있습니다..

1. 첫 번째, check the battery connections. Make sure the battery is properly inserted into the jump starter and the positive and negative connectors are connected.
2. 다음, try to charge the battery. 배터리가 완전히 충전된 경우, the jump starter may not be getting power from the battery.
3. 드디어, check the cord. Make sure it is securely plugged into the jump starter and the outlet.

끝

이 글을 읽은 후, you should now have a better understanding of the meaning of Hulkman jump starter error codes. If you are ever faced with one of these error codes, you should now know how to interpret them and what steps you need to take in order to fix the problem.