Kab lus no yog hais txog kev daws teeb meem ntawm Dewalt 1400 dhia pib, thiab tag nrho cov solutons yooj yim uas koj yuav tau sim yog tias koj lub cuab yeej ua haujlwm tsis zoo. Dewalt dhia pib yog ib lub npe nrov tshaj plaws ntawm kev ua lag luam. Lawv txhim khu kev qha thiab muaj ntau yam nta uas ua rau lawv zoo meej.
Dewalt 1400 jump starter troubleshooting
| Problem | Possible Solution |
| Unit will not charge | Make sure all of the unit’s functions are turned off. |
| Make sure a suitable gage extension cord is properly connected to both the unit and a functioning AC outlet.or Make sure the 12 volt DC charging adapter is properly connected to both the unit and a functioning DC power source. | |
| Check the connection to the AC or DC
power source. |
|
| Confirm there is a functioning AC or
DC current. |
|
| Check that the fuse in the 12 Volt DC
Adapter is not blown. |
|
| Unit fails to jump-start | Make sure unit’s Jump Starter Power
Switch is in the on position |
| Make sure a proper polarity cable
connection has been established |
|
| Make sure the unit is not being operated in the Compressor mode | |
| Check that the unit has a full charge.Recharge the unit if necessary | |
| Portable Compressor will not inflate | Make sure the Compressor Power Button has been pressed to turn the |
| Make sure the unit is not being operated in the Jump Starter mode. | |
| Make sure the Sure Fit securely screwed on to the valve stem when attempting to inflate tires; or that the nozzle adapter is securely screwed into the Sure Fit properly into the item to be inflated on all other inflatables | |
| Check that the unit has a full charge.Recharge the unit if necessary | |
| USB Port will not power appliance | Make sure the USB Power Button is in
the on position. |
| Make sure all the USB Power/Fault Indicators light solid blue. If a fault condition exists in either of the USB Ports, the USB Power/Fault Indicators will flash blue. Refer to the Important Notes in the “USB Ports” section to remedy any faults. | |
| Make sure that the total draw of all USB devices plugged into the USB Ports does not exceed 3.1A. | |
| Check that the unit has a full charge.Recharge the unit if necessary | |
| LED Area Light does not come on | Make sure the Area Light Power Button is in the on position |
| Check that the unit has a full charge.Recharge the unit if necessary |
Qee qhov feem ntau Dewalt 1400 dhia pib teeb meem thiab kev daws teeb meem:
1. Roj teeb tsis zoo: Yog tias koj lub roj teeb tsis zoo, koj yuav tau hloov nws. Ua li no, qhib lub roj teeb compartment thiab tshem lub roj teeb. Ces, hloov lub roj teeb nrog ib tug tshiab thiab kaw lub compartment.
2. Light not turn off: Yog koj Dewalt 1400 jump starter is not turning off, you need to: Xyuas cov roj teeb theem. Yog lub roj teeb tsawg, the jump starter may not be able to turn off. Make sure that the jump starter is properly plugged into an outlet. If it is not plugged in, the battery may not be able to power the jump starter.
2. Faulty charger: Yog hais tias lub charger yog faulty, tej zaum nws yuav tsis tau them lub roj teeb. Mus xyuas qhov no, txuas lub charger rau lub qhov hluav taws xob thiab qhib nws. Yog tias lub teeb ntawm lub charger hloov ntsuab, ces lub charger ua haujlwm zoo. Yog lub teeb tsis tig ntsuab, ces koj yuav tau hloov lub charger.
3. Txoj hlua puas: Yog koj txoj hlua puas lawm, nws yuav tsis tuaj yeem hloov lub zog ntawm lub tshuab hluav taws xob mus rau lub roj teeb. Mus xyuas qhov no, disconnect tus qaum ntawm lub tshuab hluav taws xob thiab ntsaws rau hauv lwm lub qhov hluav taws xob. Yog lub tshuab hluav taws xob pib tam sim no, ces koj qaum tej zaum yuav puas thiab yuav tsum tau hloov.
4. Hloov pauv: Yog tias koj pom tias muaj qee yam tsis zoo nrog Dewalt dhia pib, ces nws yuav yog lub sij hawm los hloov qhov hloov. Qhov no yog ib qho yooj yim kho, raws li koj tuaj yeem yuav qhov hloov pauv ntawm txhua lub khw muag khoom hluav taws xob thiab nruab nws hauv ob peb feeb xwb.
5. Tsis muaj zog: Yog tias koj lub roj teeb tsis muaj lub zog txaus los qhib lub dhia pib, tom qab ntawd koj yuav tau txais lub roj teeb tshiab ua ntej koj tuaj yeem sim dua. Koj tuaj yeem nrhiav tau ib qho ntawm txhua lub khw muag khoom hauv zos lossis txawm tias eBay lossis Amazon.
6. Tsawg voltage: Yog koj Dewalt 1400 jump starter muaj tsawg voltage, tom qab ntawd nws tuaj yeem txhais tau tias muaj qee yam teeb meem nrog lub roj teeb tseem ceeb lossis lub charger unit nws tus kheej. Qhov no yog lwm qhov laj thawj zoo kom tau txais lub roj teeb tshiab sai li sai tau vim tias ib zaug qhov no tshwm sim, nws tuaj yeem kho tau nyuaj heev thiab yuav tsum tau hloov lwm qhov chaw thiab (xws li lub charger circuit).
Dewalt 1400 keeps beeping and Solution
View Dewalt Jump Starter Details
Yog koj Dewalt 1400 dhia pib yog beeping, Nov yog qee qhov kev daws teeb meem yooj yim kom tau txais nws rov ua haujlwm dua. Yog lub roj teeb tsawg, Yog tias muaj teeb meem nrog lub charger, Yog hais tias qhov hluav taws xob kev twb kev txuas yog faulty.
- Yog lub roj teeb tsawg, txuas cov jumper cables thiab muab Dewalt 1400 nyob rau hauv pib hom. Nias thiab tuav lub hwj huam khawm rau 3 vib nas this kom txog thaum lub teeb liab pib flash. Tso lub hwj chim khawm thiab tos 10 vib nas this. Nias thiab tuav lub khawm pib rau 3 vib nas this kom txog thaum lub teeb liab tig tawm. Yog tias qhov no tsis ua haujlwm, them lub roj teeb uas siv lub roj teeb sab nraud.
- Yog tias muaj teeb meem nrog lub charger, disconnect lub hwj chim qaum ntawm lub qhov hluav taws xob thiab ntsaws rau hauv lwm lub qhov hluav taws xob hauv koj lub tsev. Sim cov chargers sib txawv kom pom tias ib qho ua haujlwm zoo dua li lwm tus. Yog tias tsis ua haujlwm, sim hloov lub charger.
- Yog hais tias qhov hluav taws xob kev twb kev txuas yog faulty, sim txuas ib lub xaim ntawm ib lub sij hawm kom pom tias qhov twg ua haujlwm zoo tshaj. Qee lub sij hawm koj tuaj yeem kho cov hlau tawg los ntawm kev sib txuas rov qab ua ke los yog siv cov khoom siv sib txuas.
Dewalt 1400 jump starter yuav tsis tua
Yog tias koj muaj teeb meem sim kom tau koj Dewalt 1400 dhia pib mus tua, muaj ob peb txoj kev daws teeb meem.
- Xyuas kom tseeb tias lub roj teeb tau them tag nrho. Lub roj teeb hauv Dewalt dhia pib yuav tsum yog tsawg kawg 3/4 puv kom ua haujlwm zoo. Yog lub roj teeb tsawg, nws yuav muaj tsawg zog los tig lub cev muaj zog thaum koj nias lub pob.
- Xyuas kom tseeb tias qhov kev sib txuas hauv av yog qhov zoo. Yog tias koj tab tom ntsib teeb meem nrog koj tus pib dhia, tej zaum nws yuav yog vim muaj kev sib txuas hauv av tsis zoo ntawm lub roj teeb thiab lub cev muaj zog. Ntsuas koj qhov kev sib txuas hauv av los ntawm kev kaw lub hwj chim rau lub tsev thiab kov ob qho tib si hlau ua ke (zoo li los ntawm lub thawv hluav taws xob) rau ob peb feeb. Yog nws tsis chim, tej zaum yuav tsis muaj kev tawm tsam txaus ntawm lawv thiab koj lub jumper yuav ua haujlwm tsis raug.
- Xyuas kom tseeb tias tag nrho cov cables txuas ruaj ntseg. Cov kab xoob xoob tuaj yeem ua teeb meem nrog dhia pib, yog li xyuas kom lawv muaj kev ruaj ntseg zoo ua ntej sim pib lub chav tsev dua.
- Sim cov roj teeb sib txawv. Qee zaum ib lub roj teeb yuav ua haujlwm zoo thaum lwm tus yuav tsis ua haujlwm. Hloov cov roj teeb tuaj yeem pab kho qee yam teeb meem nrog kev pib dhia.
Dewalt dhia pib 1400 tsis ua haujlwm lossis tsis them nyiaj
Yog hais tias koj dewalt dhia pib 1400 tsis ua haujlwm, muaj ob peb yam uas koj tuaj yeem ua tau los daws qhov teeb meem. Nov yog qee qhov teeb meem feem ntau thiab lawv cov kev daws teeb meem yooj yim:
- Xyuas kom tseeb tias lub roj teeb raug teeb tsa kom raug. Sim hloov lub roj teeb yog tias qhov pib dhia tsis ua haujlwm.
- Xyuas lub qhov hluav taws xob uas lub jumpstarter txuas nrog. Xyuas kom tseeb tias nws raug ntsaws rau hauv thiab qhov hluav taws xob yog qhov tseeb.
- Xyuas kom tseeb tias txoj hlua txuas ruaj ntseg rau hauv lub tshuab dhia dhia thiab hauv qhov hluav taws xob.
- Xyuas seb puas muaj kev cuam tshuam lossis cov khib nyiab ntawm lub qaum thiab lub roj teeb lossis nruab nrab ntawm lub roj teeb thiab dhia pib. Tshem tawm tej kev cuam tshuam thiab sim dhia pib dua.
- Pib dua lub dhia pib los ntawm nias thiab tuav cia ob lub nyees khawm rau 10 vib nas this. Qhov no yuav tshem tawm cov cim xeeb tsis raug thiab yuav tsum kho feem ntau dhia pib.
Yog tias tag nrho cov kev daws teeb meem no ua tsis tiav, tej zaum nws yuav tsim nyog coj koj dhia pib rau kev kho. Dewalt feem ntau muab 90-hnub lav ntawm lawv qhov pib dhia, yog li yog tias koj ntsib teeb meem nrog lawv, xav tias dawb hu mus rau lawv pab neeg muab kev pabcuam.
The instructions
- Kauj ruam 1: Tshem lub roj teeb ntawm lub tsheb.
- Kauj ruam 2: Muab lub Dewalt 1400 dhia pib ntawm ib lub tiaj, theem nto.
- Kauj ruam 3: Muab cov jumper cables nyob rau sab saum toj ntawm ib leeg kom lawv txuas rau hauv txoj kab ncaj nraim.
- Kauj ruam 4: Txuas ib qho kawg ntawm jumper cables rau koj qhov zoo (+) roj teeb davhlau ya nyob twg thiab lwm qhov kawg rau koj qhov tsis zoo (-) roj teeb davhlau ya nyob twg.
- Kauj ruam 5: Txuas ib kawg ntawm koj 12-gauge jumper cable rau lub davhlau ya nyob twg zoo ntawm koj Dewalt 1400 dhia pib thiab lwm qhov kawg rau koj lub davhlau ya nyob twg tsis zoo ntawm koj lub tsheb.
Dewalt dxaeps2 kev daws teeb meem
Saib Dewalt Dxaeps2 Jump Starter Paub meej
Dewalt Dxaeps2 dhia pib teeb meem tuaj yeem tawg mus rau hauv 3 pawg loj: roj teeb, charger, thiab electronics. Nyob rau hauv no Dewalt dhia pib teeb meem phau ntawv qhia, peb yuav taug kev koj hla txhua kauj ruam ntawm kev daws teeb meem koj dewalt dxaeps2 dhia pib.
Battery Isn’t Holding A Charge
Qhov teeb meem feem ntau nrog lub roj teeb yog tias nws tsis tuav tus nqi. Feem ntau ua rau qhov no yog overcharge. Qhov no tuaj yeem tshwm sim los ntawm kev tso nws thaum hmo ntuj lossis cia nws zaum ntawm lub charger ntev dhau lawm. Yog tias koj lub roj teeb tsis tuav tus nqi tag nrho thiab koj tau sim them nws rau lub sijhawm ntev ua ntej pib dhia, tiv tauj peb kom paub ntau ntxiv txog dab tsi tuaj yeem ua rau qhov teeb meem no.
Charger Poor Contact
Qhov thib ob feem ntau qhov teeb meem nrog lub charger yog kev sib cuag tsis zoo ntawm lub ntsaws thiab lub chaw txais khoom. Qhov no tuaj yeem tshwm sim los ntawm cov av lossis cov khib nyiab hauv thaj chaw uas ob qhov txuas sib ntsib, uas tiv thaiv kev sib cuag ntawm lawv. Yog tias koj pom tias koj lub charger tsis ua haujlwm zoo nrog koj Dewalt Dxaeps2 dhia pib lub chaw txais khoom, sim ntxuav cov av los yog cov khib nyiab uas muaj nyob rau ntawm ob sab ntawm lub ntsaws nws tus kheej (sab uas kov koj lub qhov (socket).). Yog tias qhov no tsis daws koj qhov teeb meem, tiv tauj peb kom paub ntau ntxiv txog dab tsi tuaj yeem ua rau qhov teeb meem no.
Electronics Not Working Properly
Lub tshuab hluav taws xob ntawm koj lub tshuab hluav taws xob Dewalt Dxaeps2 dhia pib yuav ua rau muaj teeb meem rau koj yog tias lawv tsis ua haujlwm zoo lossis tsis ua haujlwm txhua lub sijhawm thaum ntsaws.. Cov no suav nrog tej yam xws li LED teeb ntawm lub cuab yeej, them qhov taw qhia teeb ntawm lub hwj chim bank nws tus kheej, thiab tej nyees khawm siv los tswj nws cov hauj lwm xws li:
- On/Off khawm
- Charge qhov taw qhia teeb
- LED teeb nyem khawm
- Rov qab polarity tiv thaiv (RPP) khawm
- Cyclic charging tiv thaiv (CYCP) khawm.
air compressor not working
Ob leeg Dewalt Dxaej14 thiab NOCO GB40 yog cov super haib dhia pib ntawm kev lag luam, koj tuaj yeem xaiv ib qho rau koj lub tsheb dhia pib.
Cov lus qhia yuav ua li cas los daws qhov teeb meem Dewalt cua compressor tsis ua haujlwm:
- Xyuas kom tseeb tias lub tshuab cua compressor kaw thiab unplugged los ntawm lub hwj chim qhov chaw
- Tshem lub hau roj
- Siv lub teeb nyem thiab lub hau ntswj, ua tib zoo tshem lub hau rov qab ntawm lub tshuab cua compressor
- Tshem tawm lub pob qhov hloov kho los ntawm tig nws lub voj voog kom deb li deb li nws yuav mus txog thaum koj hnov ib lub suab nyem thiab hnov tsis kam thaum tig mus rau ob qho tib si. (feem ntau yog clockwise)
- Yog tias koj tuaj yeem tig lub pob qhov rooj no, tom qab ntawd xyuas koj qib roj los ntawm saib koj cov roj dipstick nyob ze qhov chaw uas nws tau muab tshem tawm ua ntej unscrewing nws - cov kua yuav tsum muaj tsawg kawg yog ib nrab puv., tab sis yog tias qis, ntxiv ib co ntxiv kom txog thaum nws puv dua
- Yog tias txhua yam kuaj xyuas kom raug ntawm no, tshuaj xyuas koj lub tshuab kiv cua kom muaj kev puas tsuaj lossis hnav ntau dhau uas yuav ua rau nws tsis ua haujlwm zoo thiab hloov yog tias tsim nyog (feem ntau yuav xav tau hloov nrog ib qho tshiab)
Xaus
Dewalt 1400 jump starter troubleshooting tuaj yeem nyuaj yog tias koj tsis muaj kev paub zoo. Kab lus no yuav muab tag nrho cov kev daws teeb meem yooj yim rau Dewalt 1400 dhia pib teeb meem kom koj tuaj yeem tau txais koj lub tshuab ua haujlwm sai li sai tau. Nco ntsoov bookmark nplooj ntawv no kom koj ib txwm muaj cov ntaub ntawv tshiab muaj nyob rau hauv yuav ua li cas kho qhov pib pib teeb meem nrog koj Dewalt 1400.