ʻO kēia ʻatikala e pili ana i ka hoʻoponopono ʻana i kahi Dewalt 1400 lele hoʻomaka, a me nā mea hoʻonā maʻalahi a pau e pono ai ʻoe e hoʻāʻo inā ʻaʻole pono kāu hāmeʻa. Nā mea hoʻomaka lele ʻo Dewalt ʻo ia kekahi o nā hōʻailona kaulana loa ma ka mākeke. He hilinaʻi lākou a hāʻawi i nā ʻano hiʻohiʻona e hoʻopōmaikaʻi iā lākou.
Dewalt 1400 lele hoʻomaka pilikia
Problem | Possible Solution |
Unit will not charge | Make sure all of the unit’s functions are turned off. |
Make sure a suitable gage extension cord is properly connected to both the unit and a functioning AC outlet.or Make sure the 12 volt DC charging adapter is properly connected to both the unit and a functioning DC power source. | |
Check the connection to the AC or DC
power source. |
|
Confirm there is a functioning AC or
DC current. |
|
Check that the fuse in the 12 Volt DC
Adapter is not blown. |
|
Unit fails to jump-start | Make sure unit’s Jump Starter Power
Switch is in the on position |
Make sure a proper polarity cable
connection has been established |
|
Make sure the unit is not being operated in the Compressor mode | |
Check that the unit has a full charge.Recharge the unit if necessary | |
Portable Compressor will not inflate | Make sure the Compressor Power Button has been pressed to turn the |
Make sure the unit is not being operated in the Jump Starter mode. | |
Make sure the Sure Fit securely screwed on to the valve stem when attempting to inflate tires; or that the nozzle adapter is securely screwed into the Sure Fit properly into the item to be inflated on all other inflatables | |
Check that the unit has a full charge.Recharge the unit if necessary | |
USB Port will not power appliance | Make sure the USB Power Button is in
the on position. |
Make sure all the USB Power/Fault Indicators light solid blue. If a fault condition exists in either of the USB Ports, the USB Power/Fault Indicators will flash blue. Refer to the Important Notes in the “USB Ports” section to remedy any faults. | |
Make sure that the total draw of all USB devices plugged into the USB Ports does not exceed 3.1A. | |
Check that the unit has a full charge.Recharge the unit if necessary | |
LED Area Light does not come on | Make sure the Area Light Power Button is in the on position |
Check that the unit has a full charge.Recharge the unit if necessary |
ʻO kekahi o nā Dewalt maʻamau 1400 nā pilikia hoʻomaka lele a me nā hoʻonā:
1. ʻino ka pākaukau: Inā ʻino kāu pākaukau, pono ʻoe e pani. No ka hana ʻana i kēia, e wehe i ke keena pila a e wehe i ka pila. A laila, hoʻololi i ka pākaukau me kahi mea hou a pani i ke keʻena.
2. Light not turn off: Ina kou Dewalt 1400 jump starter is not turning off, you need to: E nānā i ke kiʻekiʻe o ka pākaukau. Inā haʻahaʻa ka pākaukau, the jump starter may not be able to turn off. Make sure that the jump starter is properly plugged into an outlet. If it is not plugged in, the battery may not be able to power the jump starter.
2. ʻAha ʻole ka charger: Inā hewa ka charger, ʻaʻole hiki ke hoʻopaʻa i ka pākaukau. E nānā i kēia, e hoʻopili i ka charger i kahi puka puka a hoʻā. Inā ʻōmaʻomaʻo ke kukui o ka charger, a laila, e hana pono ana ka charger. Inā ʻaʻole ʻōmaʻomaʻo ke kukui, a laila pono ʻoe e hoʻololi i ka charger.
3. Ua pōʻino ke kaula: Ina ua poino kou kaula, ʻaʻole hiki iā ia ke hoʻololi i ka mana mai ka generator i ka pā. E nānā i kēia, e hoʻokaʻawale i ke kaula mai ka generator a hoʻopaʻa iā ia i kahi puka ʻē aʻe. Inā hoʻomaka ka mīkini hana i kēia manawa, a laila ua pōʻino paha kāu kaula a pono e hoʻololi.
4. Ua haki ke kī: Inā ʻoe e ʻike aia kekahi hewa me ka hoʻomaka lele ʻana o Dewalt, a laila hiki i ka manawa e hoʻololi i ke kī. He hoʻoponopono maʻalahi kēia, no ka mea hiki iā ʻoe ke kūʻai i kahi pani ma kekahi hale kūʻai uila a hoʻokomo iā ia i loko o nā minuke wale nō.
5. ʻAʻohe mana: Inā ʻaʻole lawa ka mana o kāu pākaukau e hoʻāla ai i ka mea hoʻomaka lele, a laila pono ʻoe e kiʻi i kahi pākaukau hou ma mua o kou hoʻāʻo hou ʻana. Hiki iā ʻoe ke loaʻa i kekahi ma nā hale kūʻai kaʻa kūloko a i ʻole eBay a i ʻole Amazon.
6. Volta haʻahaʻa: Ina kou Dewalt 1400 he haʻahaʻa ka mana o ka pahu hoʻomaka lele, a laila hiki ke manaʻo ʻia aia kekahi ʻano pilikia me ka pūʻolo pila nui a i ʻole ka ʻāpana charger ponoʻī. He kumu maikaʻi ʻē aʻe kēia no ka loaʻa ʻana o kahi pā uila hou i ka hikiwawe no ka mea i ka wā e hiki mai ana kēia, hiki ke paʻakikī loa e hoʻoponopono a pono paha e hoʻololi i nā ʻāpana ʻē aʻe (e like me ke kaapuni kaapuni).
Dewalt 1400 keeps beeping and Solution
View Dewalt Jump Starter Details
Ina kou Dewalt 1400 ke kani nei ka pahu hoʻomaka, eia kekahi mau hoʻonā maʻalahi e hana hou. Inā haʻahaʻa ka pākaukau, Inā he pilikia me ka charger, Inā hewa ka pili uila.
- Inā haʻahaʻa ka pākaukau, hoʻohui i nā kaula lele a kau i ka Dewalt 1400 ma ke ʻano hoʻomaka. E kaomi a paʻa i ke pihi mana no 3 kekona a hiki i ka hoomaka ana o ke kukui ulaula. E hoʻokuʻu i ke pihi mana a kali 10 kekona. E kaomi a paʻa i ke pihi hoʻomaka no 3 kekona a pio ke kukui ulaula. Inā ʻaʻole hana kēia, e hoʻopaʻa i ka pākaukau me ka hoʻohana ʻana i ka mea hoʻoili pila waho.
- Inā he pilikia me ka charger, e hoʻokaʻawale i ke kaula mana mai ka puka puka a hoʻopaʻa iā ia i kahi puka ʻē aʻe o kou hale. E ho'āʻo i nā loina like ʻole e ʻike inā ʻoi aku ka maikaʻi o kekahi ma mua o kekahi. Inā ʻaʻole hana kēlā, e ho'āʻo e hoʻololi i ka charger.
- Inā hewa ka pili uila, e ho'āʻo e hoʻohui i hoʻokahi uea i ka manawa e ʻike ai i ka mea ʻoi aku ka maikaʻi. I kekahi manawa hiki iā ʻoe ke hoʻoponopono i kahi uwea naha ma ka hoʻopaʻa ʻana iā ia a i ʻole ka hoʻohana ʻana i kahi pahu splice.
Dewalt 1400 ʻaʻole e pio ka mea hoʻomaka lele
Inā pilikia ʻoe e kiʻi i kāu Dewalt 1400 lele hoʻomaka e hoʻopau, aia kekahi mau hoʻonā hiki.
- E hōʻoia i ka piha piha ʻana o ka pākaukau. ʻO ka pākaukau ma kahi hoʻomaka lele Dewalt e liʻiliʻi loa 3/4 piha e hana pono. Inā haʻahaʻa ka pākaukau, liʻiliʻi ka mana e hoʻohuli i ke kaʻa ke paʻi ʻoe i ke pihi.
- E hōʻoia i ka maikaʻi o ka pilina honua. Inā ʻoe e ʻike nei i nā pilikia me kāu jump starter, ma muli paha o ka maikaʻi ʻole o ka pilina ma waena o ka pākaukau a me ke kaʻa. E ho'āʻo i kāu pili honua ma ka pani ʻana i ka mana i ka ʻāpana a hoʻopā pū i nā ʻāpana metala ʻelua (e like me ka pahu uila) no kekahi mau kekona. Inā ʻaʻole ia e ʻā, ʻaʻole lawa paha ke kūʻē ʻana ma waena o lākou a ʻaʻole hana pololei kāu lele.
- E hōʻoia ua pili pono nā kaula a pau. Hiki i nā kaula ʻoluʻolu ke hoʻopilikia i nā mea hoʻomaka lele, no laila e hoʻopaʻa pono iā lākou ma mua o ka hoʻāʻo e hoʻomaka hou i ka ʻāpana.
- E ho'āʻo i nā ʻōhua ʻokoʻa. I kekahi manawa e hana maikaʻi kekahi pākaukau a ʻaʻole hana kekahi. Hiki i ka hoʻololi ʻana i nā pila ke kōkua i ka hoʻoponopono ʻana i kekahi mau pilikia maʻamau me nā mea hoʻomaka lele.
Mea hoʻomaka lele ʻo Dewalt 1400 ʻaʻole hana a ʻaʻole e uku
Inā kāu dewalt lele hoʻomaka 1400 ʻaʻole hana, aia kekahi mau mea hiki iā ʻoe ke hana e hoʻoponopono i ka pilikia. Eia kekahi o nā pilikia maʻamau a me kā lākou hoʻonā maʻalahi:
- E hōʻoia i ka hoʻokomo pono ʻana o ka pākaukau. E ho'āʻo e hoʻololi i ka pākaukau inā ʻaʻole e holo ka hoʻomaka ʻana o ka lele.
- E nānā i ka puka i hoʻopili ʻia ai ka mea hoʻomaka lele. E hoʻopaʻa pono i ka hoʻopili pono ʻana a ua pololei ka volta.
- E hōʻoia ua hoʻopili paʻa ʻia ke kaula i ka hoʻomaka lele a i loko o kahi puka.
- E nānā i nā mea keakea a i ʻole nā ʻōpala ma waena o ke kaula a me ka pākaukau a i ʻole ma waena o ka pākaukau a me ka hui hoʻomaka lele. Wehe i nā mea keʻakeʻa a hoʻāʻo hou i ka lele hoʻomaka.
- E hoʻihoʻi i ka hoʻomaka lele ma ke kaomi ʻana a hoʻopaʻa i nā pihi ʻelua no 10 kekona. E hoʻomaʻemaʻe kēia i nā hoʻomanaʻo hewa a pono e hoʻoponopono i ka hapa nui o nā mea hoʻomaka lele.
Inā hāʻule kēia mau haʻina a pau, pono paha e lawe i kāu lele hoʻomaka no ka hoʻoponopono ʻana. Hāʻawi maʻamau ʻo Dewalt i kahi palapala hōʻoia 90 lā i kā lākou hoʻomaka lele, no laila inā loaʻa iā ʻoe kekahi pilikia me lākou, e ʻoluʻolu e kelepona aku i kā lākou hui lawelawe mea kūʻai aku.
ʻO nā kuhikuhi
- ʻanuʻu 1: Wehe i ka pila mai ke kaʻa.
- ʻanuʻu 2: E kau i ka Dewalt 1400 lele lele ma kahi palahalaha, ʻili papa.
- ʻanuʻu 3: E kau i nā kaula lele ma luna o kekahi i hoʻohui ʻia i kahi laina pololei.
- ʻanuʻu 4: E hoʻohui i kekahi o nā wēlau o nā kaula lele i kāu pono (+) pahu pākaukau a me kekahi hopena i kāu ʻino (-) pahu pākaukau.
- ʻanuʻu 5: E hoʻohui i kekahi wēlau o kāu kelepona lele 12-gauge i ka pahu kūpono ma kāu Dewalt 1400 lele hoʻomaka a me kekahi hopena i kāu pahu kuʻekuʻe ma kāu kaʻa.
Hoʻoponopono pilikia ʻo Dewalt dxaeps2
Nānā Dewalt Dxaeps2 Jump Starter Details
Hiki ke wāwahi ʻia nā pilikia hoʻomaka lele ʻo Dewalt Dxaeps2 3 nā māhele nui: pākaukau, mea hoʻoili, a me nā mea uila. Ma kēia alakaʻi hoʻoponopono pilikia ʻo Dewalt jump starter, e hele mākou iā ʻoe ma kēlā me kēia kaʻina o ka hoʻoponopono ʻana i kāu dewalt dxaeps2 jump starter.
Battery Isn’t Holding A Charge
ʻO ka pilikia maʻamau me ka pākaukau ʻaʻole ia e paʻa i ka uku. ʻO ke kumu maʻamau o kēia ka overcharging. Hiki ke hana ʻia kēia ma ka waiho ʻana iā ia i ka pō a i ʻole ka waiho ʻana ma luna o ka charger no ka lōʻihi loa. Inā ʻaʻole paʻa kāu pākaukau a ua hoʻāʻo ʻoe e hoʻopaʻa iā ia no kahi manawa lōʻihi ma mua o ka hoʻomaka ʻana o ka lele., e leka uila mai iā mākou no ka ʻike hou aku e pili ana i ke kumu o kēia pilikia.
Charger Poor Contact
ʻO ka lua o ka pilikia maʻamau me ka charger ʻo ia ka pilina maikaʻi ʻole ma waena o ka plug a me ka pahu. Hiki ke kumu i ka lepo a i ʻole ka ʻōpala ma kahi e hui ai nā mea hoʻohui ʻelua, ka mea e pale ai i ka pili pono ma waena o lākou. Inā ʻike ʻoe ʻaʻole maikaʻi ka launa pū ʻana o kāu charger me kāu pahu pahu hoʻomaka o Dewalt Dxaeps2., e ho'āʻo e hoʻomaʻemaʻe i ka lepo a i ʻole ka ʻōpala i loaʻa ma nā ʻaoʻao ʻelua o ke plug ponoʻī (ka ʻaoʻao e pili ana i kou kumu). Inā ʻaʻole hoʻoholo kēia i kou pilikia, e leka uila mai iā mākou no ka ʻike hou aku e pili ana i ke kumu o kēia pilikia.
Electronics Not Working Properly
Hiki i nā mea uila o kāu Dewalt Dxaeps2 lele hoʻomaka ke hoʻopilikia iā ʻoe inā ʻaʻole lākou e hana pono a ʻaʻole hana paha i ka wā i hoʻopili ʻia.. Loaʻa kēia mau mea e like me nā kukui LED ma ke kelepona, kukui hōʻailona hoʻopiʻi ma ka waihona mana ponoʻī, a me nā pihi i hoʻohana ʻia e hoʻomalu i kāna hana e like me:
- Pihi on/off
- Ke kukui hōʻailona hoʻopaʻa
- Pihi kukui uila
- Ka pale ʻana i ka polarity (RPP) pihi
- Palekana hoʻouka uila (CYCP) pihi.
air compressor not working
ʻO Dewalt Dxaej14 a me NOCO GB40 ʻo nā mea hoʻomaka lele ikaika loa ma nā mākeke, hiki iā ʻoe ke koho i kekahi no kāu lele kaʻa e hoʻomaka ana.
Nā ʻōlelo aʻoaʻo e pili ana i ka hoʻoponopono ʻana i kahi mea hoʻoheheʻe ea Dewalt ʻaʻole e hana:
- E hōʻoia i ka paʻa ʻana o ka ea compressor a wehe ʻia mai ke kumu mana
- Wehe i ka pāpale aila
- Ke hoʻohana nei i ke kukui uila a me ka screwdriver, wehe akahele i ka uhi hope o ka ea compressor
- Wehe i ka pihi hoʻoponopono ma ka hoʻohuli ʻana iā ia ma ka ʻaoʻao ʻākau a hiki i ka wā e lohe ai ʻoe i ke kani kaomi a ʻike ʻoe i ke kūʻē ʻana i ka wā e huli ai i kēlā me kēia ʻaoʻao. (maʻa mau)
- Inā hiki iā ʻoe ke hoʻohuli i kēia pihi, a laila e nānā i kou pae ʻaila ma ka nānā ʻana i kāu ʻaila ʻaila ma kahi kokoke i kahi i wehe ʻia ai ma mua o ka wehe ʻana iā ia - pono e piha ka wai ma ka hapa liʻiliʻi., akā inā haʻahaʻa, hoʻohui hou a piha hou
- Inā nānā pololei nā mea a pau ma aneʻi, e nānā i kāu kaʻa peʻahi no ka pōʻino a i ʻole ka ʻaʻahu nui e hiki ʻole ai ke holo pono a hoʻololi inā pono (pono paha e hoʻololi me kahi mea hou)
Ka hopena
Dewalt 1400 Hiki ke paʻakikī ka hoʻoponopono ʻana i ka hoʻomaka ʻana inā ʻaʻole ʻoe i ka ʻike kūpono. E hāʻawi kēia ʻatikala i nā solvens maʻalahi āpau no Dewalt maʻamau 1400 lele i nā pilikia hoʻomaka i hiki iā ʻoe ke hoʻāla a holo wikiwiki i kāu mīkini. E hōʻoia i ka bookmark i kēia ʻaoʻao i loaʻa iā ʻoe ka ʻike hou loa e pili ana i ka hoʻoponopono ʻana i kahi pilikia hoʻomaka lele me kāu Dewalt 1400.