Dewalt 1400 tsalle mai farawa matsala matsala da duk mafita mai sauƙi

Wannan labarin yana game da magance matsalar Dewalt 1400 tsalle mai farawa, da duk sauƙaƙan solutons waɗanda zaku buƙaci gwadawa idan na'urarku ba ta aiki da kyau. Dewalt tsalle masu farawa suna ɗaya daga cikin shahararrun samfuran a kasuwa. Suna da aminci kuma suna ba da fasali iri-iri waɗanda ke sa su zama cikakke.

Dewalt 1400 tsalle Starter matsala matsala

Problem	Possible Solution
Unit will not charge	Make sure all of the unit’s functions are turned off.
	Make sure a suitable gage extension cord is properly connected to both the unit and a functioning AC outlet.or Make sure the 12 volt DC charging adapter is properly connected to both the unit and a functioning DC power source.
	Check the connection to the AC or DC power source.
	Confirm there is a functioning AC or DC current.
	Check that the fuse in the 12 Volt DC Adapter is not blown.
Unit fails to jump-start	Make sure unit’s Jump Starter Power Switch is in the on position
	Make sure a proper polarity cable connection has been established
	Make sure the unit is not being operated in the Compressor mode
	Check that the unit has a full charge.Recharge the unit if necessary
Portable Compressor will not inflate	Make sure the Compressor Power Button has been pressed to turn the
	Make sure the unit is not being operated in the Jump Starter mode.
	Make sure the Sure Fit securely screwed on to the valve stem when attempting to inflate tires; or that the nozzle adapter is securely screwed into the Sure Fit properly into the item to be inflated on all other inflatables
	Check that the unit has a full charge.Recharge the unit if necessary
USB Port will not power appliance	Make sure the USB Power Button is in the on position.
	Make sure all the USB Power/Fault Indicators light solid blue. If a fault condition exists in either of the USB Ports, the USB Power/Fault Indicators will flash blue. Refer to the Important Notes in the “USB Ports” section to remedy any faults.
	Make sure that the total draw of all USB devices plugged into the USB Ports does not exceed 3.1A.
	Check that the unit has a full charge.Recharge the unit if necessary
LED Area Light does not come on	Make sure the Area Light Power Button is in the on position
	Check that the unit has a full charge.Recharge the unit if necessary

Wasu daga cikin mafi yawan Dewalt 1400 tsalle Starter matsaloli da mafita:

1. Batir mara kyau: Idan baturin ku ba daidai ba ne, za ku buƙaci maye gurbinsa. Don yin wannan, bude sashin baturin kuma cire baturin. Sannan, maye gurbin baturin da sabon kuma rufe daki.

2. Light not turn off: Idan Dewalt ku 1400 jump starter is not turning off, you need to: Check the battery level. Idan baturi yayi ƙasa, the jump starter may not be able to turn off. Make sure that the jump starter is properly plugged into an outlet. If it is not plugged in, the battery may not be able to power the jump starter.

2. Caja mara kyau: Idan caja yayi kuskure, maiyuwa bazai iya cajin baturin ba. Don duba wannan, haɗa cajar zuwa wani waje kuma kunna shi. Idan hasken caja ya koma kore, sannan caja yana aiki yadda ya kamata. Idan hasken bai juya kore ba, sannan zaka bukaci maye gurbin caja.

3. Lalacewar igiya: Idan igiyar ku ta lalace, maiyuwa bazai iya canja wurin wuta daga janareta zuwa baturi ba. Don duba wannan, cire haɗin igiyar daga janareta kuma toshe ta cikin wata hanyar fita. Idan janareta ya fara tashi yanzu, to tabbas igiyar ku ta lalace kuma tana buƙatar maye gurbinsu.

4. Maɓalli mai karye: Idan ka ga cewa akwai wani abu da ba daidai ba tare da Dewalt jump Starter, to yana iya zama lokacin da za a maye gurbin canji. Wannan gyara ne mai sauƙi, kamar yadda zaku iya siyan wanda zai maye gurbinsa a kowane kantin kayan lantarki kuma ku sanya shi cikin 'yan mintuna kaɗan.

5. Babu iko: Idan baturin ku bai samar da isasshen ƙarfi don kunna mai tsalle tsalle ba, sannan zaka sami sabon baturi kafin ka sake gwadawa. Kuna iya samun ɗaya a kowane kantin sayar da kayan aikin gida ko ma eBay ko Amazon.

6. Ƙananan ƙarfin lantarki: Idan Dewalt ku 1400 tsalle Starter yana da ƙananan ƙarfin lantarki, to yana iya nufin cewa akwai wata matsala game da babban baturi ko na'urar caja kanta. Wannan wani kyakkyawan dalili ne na samun sabon fakitin baturi da wuri-wuri domin da zarar hakan ta faru, yana iya zama da wahala a gyara kuma yana iya buƙatar maye gurbin wasu sassa kuma (kamar tsarin caji).

Dewalt 1400 keeps beeping and Solution

View Dewalt Jump Starter Details

Idan Dewalt ku 1400 mai tsalle tsalle yana ƙara, Anan akwai wasu hanyoyi masu sauƙi don sake yin aiki. Idan baturi yayi ƙasa, Idan akwai matsala tare da caja, Idan haɗin wutar lantarki ba daidai ba ne.

1. Idan baturi yayi ƙasa, haɗa igiyoyin jumper kuma sanya Dewalt 1400 a cikin yanayin farawa. Latsa ka riƙe maɓallin wuta don 3 sakanni har sai hasken ja ya fara walƙiya. Saki maɓallin wuta kuma jira 10 seconds. Danna ka riƙe maɓallin farawa don 3 sakanni har sai hasken ja ya kashe. Idan wannan bai yi aiki ba, Yi cajin baturi ta amfani da cajar baturi na waje.
2. Idan akwai matsala tare da caja, cire haɗin igiyar wutar lantarki daga kanti kuma toshe ta cikin wata hanyar da ke cikin gidan ku. Gwada caja daban-daban don ganin ko ɗaya yana aiki fiye da wani. Idan hakan bai yi aiki ba, gwada maye gurbin caja.
3. Idan haɗin wutar lantarki ba daidai ba ne, gwada haɗa waya ɗaya lokaci guda don ganin wanne yafi aiki. Wani lokaci za ka iya gyara waya da ta karye ta hanyar sayar da ita tare ko yin amfani da kit ɗin tsaga.

Dewalt 1400 tsalle mai farawa ba zai kashe ba

Idan kuna fuskantar matsala ƙoƙarin samun Dewalt ɗin ku 1400 tsalle mai farawa don kashewa, akwai 'yan mafita masu yiwuwa.

1. Tabbatar cewa baturi ya cika. Baturin da ke cikin mafarin tsalle na Dewalt yakamata ya zama aƙalla 3/4 cike da aiki da kyau. Idan baturi yayi ƙasa, zai sami ƙarancin ƙarfi don kashe motar lokacin da kuka danna maɓallin.
2. Tabbatar cewa haɗin ƙasa yana da kyau. Idan kuna fuskantar matsaloli tare da mafarin tsallenku, yana iya zama saboda akwai rashin kyawun haɗin ƙasa tsakanin baturi da motar. Gwada haɗin ƙasa ta hanyar kashe wuta zuwa naúrar da taɓa sassan ƙarfe biyu tare (kamar daga akwatin lantarki) na daƙiƙa biyu. Idan ba ta haskaka ba, maiyuwa babu isassun juriya a tsakanin su kuma mai tsallen ku bazai yi aiki daidai ba.
3. Tabbatar cewa duk igiyoyin suna haɗe amintacce. Kebul maras kyau na iya haifar da matsala tare da masu tsalle tsalle, don haka a tabbata an kiyaye su da kyau kafin yunƙurin sake fara naúrar.
4. Gwada batura daban-daban. Wani lokaci baturi ɗaya zai yi aiki lafiya yayin da wani ba zai yi aiki ba. Canza baturi zai iya taimakawa wajen gyara wasu al'amura na gama gari tare da masu tsalle tsalle.

Dewalt tsalle mai farawa 1400 ba ya aiki ko ba zai yi caji ba

Idan dewalt tsalle Starter 1400 ba ya aiki, akwai 'yan abubuwa da za ku iya yi don magance matsalar. Ga wasu daga cikin matsalolin da aka fi sani da kuma hanyoyin magance su:

1. Tabbatar cewa an shigar da baturin daidai. Gwada maye gurbin baturin idan fara tsalle baya aiki.
2. Duba hanyar da aka haɗa mai tsalle tsalle. Tabbatar cewa an haɗa shi da kyau kuma ƙarfin lantarki daidai ne.
3. Tabbatar da cewa an toshe igiyar amintacce a cikin mafarin tsalle da kuma cikin wurin fita.
4. Bincika duk wani cikas ko tarkace tsakanin igiya da baturi ko tsakanin baturi da tsalle naúrar farawa. Cire duk wani cikas kuma a sake gwada jumpingstart.
5. Sake saita mafarin tsalle ta latsa ka riƙe maɓallan biyu don 10 seconds. Wannan zai share duk wani kuskuren ƙwaƙwalwar ajiya kuma yakamata ya gyara yawancin masu farawa tsalle.

Idan duk waɗannan mafita sun gaza, yana iya zama dole a ɗauki mafarin tsalle don gyarawa. Dewalt yawanci yana ba da garanti na kwanaki 90 akan masu fara tsalle, don haka idan kun fuskanci wata matsala da su, jin kyauta don isa ga ƙungiyar sabis na abokin ciniki.

The instructions

• Mataki 1: Cire baturin daga abin hawa.
• Mataki 2: Sanya Dewalt 1400 tsalle mai farawa a kan lebur, matakin surface.
• Mataki 3: Sanya igiyoyin jumper a saman juna don a haɗa su a cikin layi madaidaiciya.
• Mataki 4: Haɗa ɗaya daga cikin ƙarshen igiyoyin jumper zuwa tabbataccen ku (+) tashar baturi da wani ƙarshen mara kyau naka (-) tashar baturi.
• Mataki 5: Haɗa ƙarshen ƙarshen kebul ɗin ku mai ma'auni 12 zuwa madaidaicin tasha akan Dewalt ɗin ku 1400 tsalle Starter da wani karshen zuwa mara kyau tasha a kan abin hawa.

Dewalt dxaeps2 matsala

Duba Dewalt Dxaeps2 Jump Starter Details

Matsalolin tsalle-tsalle na Dewalt Dxaeps2 za a iya rushe su 3 manyan sassa: baturi, caja, da lantarki. A cikin wannan jagorar magance matsalar Dewalt jump Starter, za mu bi ku ta kowane mataki na magance matsalar dewalt dxaeps2 jump Starter.

Battery Isn’t Holding A Charge

Batu na yau da kullun tare da baturin shine cewa baya riƙe caji. Mafi yawan sanadin hakan shine yawan caji. Ana iya haifar da hakan ta hanyar barin shi a cikin dare ɗaya ko barin shi ya zauna akan caja na dogon lokaci. Idan baturin ku ba ya riƙe caji kwata-kwata kuma kun yi ƙoƙarin yin cajin shi na dogon lokaci kafin fara tsalle., tuntuɓe mu don ƙarin bayani game da abin da zai iya haifar da wannan batu.

Charger Poor Contact

Batu na biyu mafi yawan gama gari tare da caja shine rashin mu'amala tsakanin filogi da ma'ajiyar. Ana iya haifar da wannan ta hanyar datti ko tarkace a yankin da masu haɗin haɗin biyu ke haɗuwa, wanda ke hana mu'amala mai kyau a tsakaninsu. Idan ka lura cewa caja ɗinka baya yin kyakkyawar tuntuɓar ma'ajiyar tsalle ta Dewalt Dxaeps2., gwada tsaftace duk wani datti ko tarkace da ka iya kasancewa a bangarorin biyu na filogin kanta (gefen da ya taɓa soket ɗin ku). Idan wannan bai warware matsalar ku ba, tuntuɓe mu don ƙarin bayani game da abin da zai iya haifar da wannan batu.

Electronics Not Working Properly

Na'urar lantarki ta Dewalt Dxaeps2 jump Starter na iya haifar da matsala a gare ku idan ba sa aiki da kyau ko kuma ba sa aiki kwata-kwata lokacin da aka toshe su.. Waɗannan sun haɗa da abubuwa kamar fitilun LED akan na'urar, cajin nuni haske a kan wutar lantarki kanta, da duk wani maballin da ake amfani da shi don sarrafa aikinsa kamar:

• Maɓallin Kunnawa/Kashe
• Hasken caji
• Maɓallin fitilar fitilar LED
• Juya polarity kariya (RPP) maballin
• Kariyar caji cyclic (Farashin CYCP) maballin.

air compressor not working

Dukansu Dewalt Dxaej14 da NOCO GB40 sune manyan masu tsalle tsalle masu ƙarfi akan kasuwanni, za ku iya zaɓar ɗaya ɗaya don tsalle motar ku farawa.

Umurnai kan yadda ake warware matsalar damfarar iska na Dewalt baya aiki:

1. Tabbatar an kashe damfarar iska kuma an cire shi daga tushen wutar lantarki
2. Cire hular mai
3. Amfani da walƙiya da screwdriver, a hankali cire murfin baya na compressor iska
4. Cire kullin daidaitawa ta hanyar juya shi kishiyar agogo gwargwadon yadda zai tafi har sai kun ji sautin dannawa kuma ku ji juriya lokacin jujjuya ta kowace hanya. (yawanci akan agogo)
5. Idan za ku iya kunna wannan kullin, sannan a duba matakin mai ta hanyar duba dipstick din man da ke kusa da inda aka cire shi kafin a kwance shi - ruwan ya kamata ya cika akalla rabin., amma idan kasa, ƙara wasu har sai ya sake cika
6. Idan komai ya duba daidai a nan, bincika injin fan ɗin ku don kowane lalacewa ko lalacewa mai yawa wanda zai iya haifar da rashin aiki da kyau kuma maye gurbin idan ya cancanta (mai yuwuwa zai buƙaci maye gurbin da sabo)

Kammalawa

Dewalt 1400 Matsalolin tsalle-tsalle na iya zama da wahala idan ba ku da ilimin da ya dace. Wannan labarin zai samar da duk masu sauƙin sauƙaƙe don gama gari na Dewalt 1400 tsalle matsalolin farawa domin ku iya tashi da injin ku da sauri da sauri. Tabbatar da yin alamar shafi wannan shafi domin koyaushe kuna samun sabbin bayanai kan yadda ake gyara matsalar fara tsalle tare da Dewalt ɗin ku. 1400.